Open Menu / arch / arm / boot / dts / st / stm32mp153.dtsi 
  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
 * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
 * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
 */

#include "stm32mp151.dtsi"

/ {
	cpus {
		cpu1: cpu@1 {
			compatible = "arm,cortex-a7";
			clock-frequency = <650000000>;
			device_type = "cpu";
			reg = <1>;
		};
	};

	arm-pmu {
		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-affinity = <&cpu0>, <&cpu1>;
	};

	timer {
		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
	};
};

&cs_funnel {
	in-ports {
		port@2 {
			reg = <2>;
			funnel_in_port2: endpoint {
				remote-endpoint = <&etm1_out>;
			};
		};
	};
};

&dbg_bus {
	cs_cti_cpu1: cti@500d9000 {
		compatible = "arm,coresight-cti", "arm,primecell";
		reg = <0x500d9000 0x1000>;
		clocks = <&rcc CK_DBG>;
		clock-names = "apb_pclk";
		#address-cells = <1>;
		#size-cells = <0>;
		access-controllers = <&dbg_bus 0>;
		status = "disabled";

		trig-conns@0 {
			reg = <0>;
			arm,trig-in-sigs = <0 4 5>;
			arm,trig-in-types = <PE_DBGTRIGGER
					     GEN_IO
					     GEN_IO>;
			arm,trig-out-sigs = <0 7>;
			arm,trig-out-types = <PE_EDBGREQ
					      PE_DBGRESTART>;
			cpu = <&cpu1>;
		};

		trig-conns@2 {
			reg = <2>;
			arm,trig-in-sigs = <2 3 6>;
			arm,trig-in-types = <ETM_EXTOUT
					     ETM_EXTOUT
					     ETM_EXTOUT>;
			arm,trig-out-sigs = <1 2 3 4>;
			arm,trig-out-types = <ETM_EXTIN
					      ETM_EXTIN
					      ETM_EXTIN
					      ETM_EXTIN>;
			arm,cs-dev-assoc = <&cs_etm1>;
		};
	};

	cs_etm1: etm@500dd000 {
		compatible = "arm,coresight-etm3x", "arm,primecell";
		reg = <0x500dd000 0x1000>;
		cpu = <&cpu1>;
		clocks = <&rcc CK_DBG>, <&rcc CK_TRACE>;
		clock-names = "apb_pclk", "atclk";
		access-controllers = <&dbg_bus 0>;
		status = "disabled";

		out-ports {
			port {
				etm1_out: endpoint {
					remote-endpoint = <&funnel_in_port2>;
				};
			};
		};
	};
};

&etzpc {
	m_can1: can@4400e000 {
		compatible = "bosch,m_can";
		reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
		reg-names = "m_can", "message_ram";
		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-names = "int0", "int1";
		clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
		clock-names = "hclk", "cclk";
		resets = <&rcc FDCAN_R>;
		bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
		access-controllers = <&etzpc 62>;
		status = "disabled";
	};

	m_can2: can@4400f000 {
		compatible = "bosch,m_can";
		reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
		reg-names = "m_can", "message_ram";
		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-names = "int0", "int1";
		clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
		clock-names = "hclk", "cclk";
		resets = <&rcc FDCAN_R>;
		bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
		access-controllers = <&etzpc 62>;
		status = "disabled";
	};
};