// SPDX-License-Identifier: GPL-2.0-or-later
// Copyright 2021 Inventec Corp.

/dts-v1/;

#include "aspeed-g6.dtsi"
#include "aspeed-g6-pinctrl.dtsi"
#include <dt-bindings/i2c/i2c.h>
#include <dt-bindings/gpio/aspeed-gpio.h>

/ {
	model = "TRANSFORMERS BMC";
	compatible = "inventec,transformer-bmc", "aspeed,ast2600";

	aliases {
		serial4 = &uart5;
	};

	chosen {
		stdout-path = &uart5;
		bootargs = "console=ttyS4,115200n8";
	};

	memory@80000000 {
		device_type = "memory";
		reg = <0x80000000 0x80000000>;
	};

	leds {
		compatible = "gpio-leds";

		// UID led
		uid {
			label = "UID_LED";
			gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
		};

		// Heart beat led
		heartbeat {
			label = "HB_LED";
			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
		};
	};
};

&mdio0 {
	status = "okay";

	ethphy0: ethernet-phy@0 {
		compatible = "ethernet-phy-ieee802.3-c22";
		reg = <1>;
	};
};

&mac3 {
	status = "okay";
	phy-mode = "rgmii";
	phy-handle = <&ethphy0>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_rgmii4_default>;
};

&fmc {
	status = "okay";

	flash@0 {
		status = "okay";
		m25p,fast-read;
		label = "bmc";
		spi-max-frequency = <33000000>;
		spi-tx-bus-width = <2>;
		spi-rx-bus-width = <2>;
#include "openbmc-flash-layout.dtsi"
	};

	flash@1 {
		status = "okay";
		m25p,fast-read;
		label = "bmc2";
		spi-max-frequency = <33000000>;
		spi-tx-bus-width = <2>;
		spi-rx-bus-width = <2>;
	};
};

&spi1 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_spi1_default>;

	flash@0 {
		status = "okay";
		m25p,fast-read;
		label = "bios";
		spi-max-frequency = <33000000>;
		spi-tx-bus-width = <1>;
		spi-rx-bus-width = <1>;
	};
};

&wdt1 {
	status = "okay";
};

&uart1 {
	status = "okay";
};

&uart5 {
	status = "okay";
};

&i2c0 {
	status = "okay";

	//Set bmc' slave address;
	bmc_slave@10 {
		compatible = "ipmb-dev";
		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
		i2c-protocol;
	};
};

&i2c2 {
	status = "okay";
};

&i2c3 {
	// FRU AT24C512C-SSHM-T
	status = "okay";
	eeprom@50 {
		compatible = "atmel,24c512";
		reg = <0x50>;
		pagesize = <128>;
	};
};

&i2c5 {
	status = "okay";
};

&i2c6 {
	status = "okay";

	tmp75@49 {
		compatible = "ti,tmp75";
		reg = <0x49>;
	};

	tmp75@4f {
		compatible = "ti,tmp75";
		reg = <0x4f>;
	};

	tmp468@48 {
		compatible = "ti,tmp468";
		reg = <0x48>;
	};
};

&i2c7 {
	status = "okay";
	adm1278@40 {
		compatible = "adi,adm1278";
		reg = <0x40>;
	};
};


&i2c8 {
	// FRU AT24C512C-SSHM-T
	status = "okay";

	eeprom@51 {
		compatible = "atmel,24c512";
		reg = <0x51>;
		pagesize = <128>;
	};

	eeprom@53 {
		compatible = "atmel,24c512";
		reg = <0x53>;
		pagesize = <128>;
	};
};

&i2c9 {
	// M.2
	status = "okay";
};

&i2c10 {
	// I2C EXPANDER
	status = "okay";

	i2c-mux@71 {
		compatible = "nxp,pca9544";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x71>;
	};

	i2c-mux@73 {
		compatible = "nxp,pca9544";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x73>;
	};
};

&i2c11 {
	// I2C EXPANDER
	status = "okay";

	i2c-mux@70 {
		compatible = "nxp,pca9544";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x70>;

		pcie_eeprom_riser1: i2c@0 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0>;

			eeprom@55 {
				compatible = "atmel,24c512";
				reg = <0x55>;
				pagesize = <128>;
			};
		};

		pcie_eeprom_riser2: i2c@1 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <1>;

			eeprom@55 {
				compatible = "atmel,24c512";
				reg = <0x55>;
				pagesize = <128>;
			};
		};

		pcie_eeprom_riser3: i2c@2 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <2>;

			eeprom@55 {
				compatible = "atmel,24c512";
				reg = <0x55>;
				pagesize = <128>;
			};
		};
	};
};

&i2c12 {
	status = "okay";

	psu0:psu0@58 {
		compatible = "pmbus";
		reg = <0x58>;
	};
};

&gpio0 {
	status = "okay";
	gpio-line-names =
	/*A0-A7*/   "","","","","","","","",
	/*B0-B7*/   "presence-ps0","power-chassis-good","","","","","presence-ps1","",
	/*C0-C7*/   "","","","","","","","",
	/*D0-D7*/   "","","","","","","","",
	/*E0-E7*/   "","","","","","","","",
	/*F0-F7*/   "","","","","power-chassis-control","","","",
	/*G0-G7*/   "","","jtag-mux","","","","","",
	/*H0-H7*/   "","","","","reset-button","power-button","","",
	/*I0-I7*/   "","","","","","","","",
	/*J0-J7*/   "","","","","","","","",
	/*K0-K7*/   "","","","","","","","",
	/*L0-L7*/   "","","","","","","","",
	/*M0-M7*/   "","","","","","","","",
	/*N0-N7*/   "","","","","","","","",
	/*O0-O7*/   "","","","","","","","",
	/*P0-P7*/   "","","","tck-mux","","","","",
	/*Q0-Q7*/   "","","","","","","","",
	/*R0-R7*/   "","","","","","","","",
	/*S0-S7*/   "","","","","","","","",
	/*T0-T7*/   "","","","","","","","",
	/*U0-U7*/   "","nmi-button","","","","","","",
	/*V0-V7*/   "","","","","power-config-full-load","","","",
	/*W0-W7*/   "","","","","","","","",
	/*X0-X7*/   "","","","","","","","",
	/*Y0-Y7*/   "","","","","","","","",
	/*Z0-Z7*/   "","","","","","","","",
	/*AA0-AA7*/ "","","","","","","","",
	/*AB0-AB7*/ "","","","","","","","",
	/*AC0-AC7*/ "","","","","","","","";
};

&lpc_snoop {
	status = "okay";
	snoop-ports = <0x80>;
};

&emmc_controller {
	status = "okay";
};

&emmc {
	status = "okay";
	non-removable;
	max-frequency = <52000000>;
	bus-width = <8>;
};

&vhub {
	status = "okay";
	aspeed,vhub-downstream-ports = <7>;
	aspeed,vhub-generic-endpoints = <21>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usb2ad_default>;
};

&rtc {
	status = "okay";
};