Documented in 1 files:
Defined in 1 files as a prototype:
Defined in 1 files as a function:
Referenced in 2 files:
Smatch caller information:
drivers/md/dm-vdo/vdo.c notify_vdo_of_read_only_mode() -> vdo_set_state()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | vdo | 4096-ptr_max |
| PARAM_VALUE | 1 | state | 3 |
| DATA_SOURCE | 0 | vdo | $0 |
| NOCHECK_CALL |
drivers/md/dm-vdo/vdo.c vdo_enter_recovery_mode() -> vdo_set_state()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | vdo | 4096-ptr_max |
| PARAM_VALUE | 1 | state | 5 |
| DATA_SOURCE | 0 | vdo | $0 |
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| NOCHECK_CALL | |||
| NO_OVERFLOW_SIMPLE | 0 | vdo->geometry.index_config.mem | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->states.vdo.config.physical_blocks | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->thread_config.bio_thread_count | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->thread_config.hash_zone_count | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->thread_config.logical_zone_count | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->thread_config.physical_zone_count | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->thread_config.thread_count |
drivers/md/dm-vdo/dm-vdo-target.c decode_from_super_block() -> vdo_set_state()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | vdo | 4096-ptr_max |
| DATA_SOURCE | 0 | vdo | $0 |
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| NOCHECK_CALL | |||
| NO_OVERFLOW_SIMPLE | 0 | vdo->geometry.index_config.mem | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->states.layout.size | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->states.vdo.config.physical_blocks | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->thread_config.bio_thread_count | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->thread_config.hash_zone_count | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->thread_config.logical_zone_count | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->thread_config.physical_zone_count | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->thread_config.thread_count |
drivers/md/dm-vdo/dm-vdo-target.c load_callback() -> vdo_set_state()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | vdo | 4096-ptr_max |
| PARAM_VALUE | 1 | state | 0 |
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| NOCHECK_CALL | |||
| NO_OVERFLOW_SIMPLE | 0 | vdo->geometry.index_config.mem | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->states.vdo.config.physical_blocks | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->thread_config.bio_thread_count | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->thread_config.hash_zone_count | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->thread_config.logical_zone_count | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->thread_config.physical_zone_count | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->thread_config.thread_count |
drivers/md/dm-vdo/dm-vdo-target.c write_super_block_for_resume() -> vdo_set_state()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | vdo | 4096-ptr_max |
| PARAM_VALUE | 1 | state | 0 |
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| NOCHECK_CALL | |||
| NO_OVERFLOW_SIMPLE | 0 | vdo->geometry.index_config.mem | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->states.vdo.config.physical_blocks | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->thread_config.bio_thread_count | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->thread_config.hash_zone_count | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->thread_config.logical_zone_count | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->thread_config.physical_zone_count | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->thread_config.thread_count |
drivers/md/dm-vdo/dm-vdo-target.c write_super_block_for_suspend() -> vdo_set_state()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | vdo | 4096-ptr_max |
| PARAM_VALUE | 1 | state | 2 |
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| NOCHECK_CALL | |||
| NO_OVERFLOW_SIMPLE | 0 | vdo->geometry.index_config.mem | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->states.vdo.config.physical_blocks | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->thread_config.bio_thread_count | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->thread_config.hash_zone_count | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->thread_config.logical_zone_count | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->thread_config.physical_zone_count | |
| NO_OVERFLOW_SIMPLE | 0 | vdo->thread_config.thread_count |