Defined in 1 files as a prototype:
Defined in 1 files as a function:
Referenced in 1 files:
Smatch caller information:
drivers/phy/ti/phy-ti-pipe3.c ti_pipe3_init() -> ti_pipe3_calibrate()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | phy | 4096-ptr_max |
| PARAM_VALUE | 0 | phy->mode | 0,2-u32max |
| BUF_SIZE | 0 | phy | s32min-(-2),1-s32max |
| BUF_SIZE | 0 | phy | s32min-(-2),1-s32max |
| CAPPED_DATA | 0 | phy->dpll_map->rate | 1 |
| CAPPED_DATA | 0 | phy->sys_clk->core | 1 |
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| NOCHECK_CALL | |||
| UNITS | 0 | phy | unit_byte |
| LOCK2 | &x->mutex | ||
| HALF_LOCKED2 | &phy->mutex | ||
| HALF_LOCKED2 | &udc->connect_lock | ||
| TYPE_LOCK | (struct phy)->mutex |
drivers/phy/ti/phy-ti-pipe3.c ti_pipe3_power_on() -> ti_pipe3_calibrate()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | phy | 4096-ptr_max |
| PARAM_VALUE | 0 | phy->mode | 1 |
| BUF_SIZE | 0 | phy | s32min-(-2),1-s32max |
| BUF_SIZE | 0 | phy | s32min-(-2),1-s32max |
| CAPPED_DATA | 0 | phy->phy_power_syscon->rd_table->n_no_ranges | 1 |
| CAPPED_DATA | 0 | phy->phy_power_syscon->volatile_table->n_no_ranges | 1 |
| CAPPED_DATA | 0 | phy->phy_power_syscon->volatile_table->n_yes_ranges | 1 |
| CAPPED_DATA | 0 | phy->sys_clk->core | 1 |
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| NOCHECK_CALL | |||
| UNITS | 0 | phy | unit_byte |
| LOCK2 | &x->mutex | ||
| HALF_LOCKED2 | &dp->lock | ||
| HALF_LOCKED2 | &dw_hdmi->mutex | ||
| HALF_LOCKED2 | &phydev->lock | ||
| HALF_LOCKED2 | &state->lock | ||
| TYPE_LOCK | (struct phy)->mutex |