Defined in 1 files as a function:
Referenced in 1 files:
Smatch caller information:
drivers/pinctrl/pinctrl-tb10x.c tb10x_gpio_request_enable() -> tb10x_pinctrl_set_config()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | state | 4096-ptr_max |
| PARAM_VALUE | 0 | state->gpios | 4096-ptr_max |
| PARAM_VALUE | 0 | state->pinfuncgrpcnt | 40 |
| PARAM_VALUE | 0 | state->pingroups | 4096-ptr_max |
| PARAM_VALUE | 1 | port | 0-8 |
| PARAM_VALUE | 2 | mode | 0-3,u32max |
| BUF_SIZE | 0 | state | 1,24,32,40,48,56,64,72,80,88,96,104,112,120,128,136,144,152,168 |
| BUF_SIZE | 0 | state | 1,24,32,40,48,56,64,72,80,88,96,104,112,120,128,136,144,152,168 |
| DATA_SOURCE | 0 | state | r pinctrl_dev_get_drvdata |
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| NOCHECK_CALL | |||
| LOCK2 | &pctl->mutex | ||
| LOCK2 | _T->lock | ||
| TYPE_LOCK | (struct pinctrl_dev)->mutex |
drivers/pinctrl/pinctrl-tb10x.c tb10x_pctl_set_mux() -> tb10x_pinctrl_set_config()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | state | 4096-ptr_max |
| PARAM_VALUE | 0 | state->gpios | 4096-ptr_max |
| PARAM_VALUE | 0 | state->pingroups | 4096-ptr_max |
| PARAM_VALUE | 0 | state->ports | 4096-ptr_max |
| PARAM_VALUE | 1 | port | 0-8 |
| BUF_SIZE | 0 | state | 1,24,32,40,48,56,64,72,80,88,96,104,112,120,128,136,144,152,168 |
| BUF_SIZE | 0 | state | 1,24,32,40,48,56,64,72,80,88,96,104,112,120,128,136,144,152,168 |
| DATA_SOURCE | 0 | state | r pinctrl_dev_get_drvdata |
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| NOCHECK_CALL | |||
| LOCK2 | _T->lock |