Open Menu /

Documented in 1 files:

Defined in 1 files as a prototype:

Defined in 1 files as a function:

Referenced in 3 files:

Smatch caller information:

drivers/net/ethernet/chelsio/cxgb3/ael1002.c ael1006_reset() -> t3_phy_reset()

Type Parameter Key Value
PARAM_VALUE 0 phy 4096-ptr_max
PARAM_VALUE 0 phy->ops 4096-ptr_max
PARAM_VALUE 1 mmd 1
PARAM_VALUE 2 wait 0
DATA_SOURCE 0 phy $0
DATA_SOURCE 2 wait $1
RX_PATH
TASK_NOT_RUNNING

drivers/net/ethernet/chelsio/cxgb3/ael1002.c ael2005_reset() -> t3_phy_reset()

Type Parameter Key Value
PARAM_VALUE 0 phy 4096-ptr_max
PARAM_VALUE 0 phy->mdio.dev->priv->mcdi->iface.proxy_rx_status s32min-s32max
PARAM_VALUE 0 phy->mdio.dev->priv->mcdi->iface.resprc s32min-s32max
PARAM_VALUE 0 phy->mdio.dev->rtnl_link_ops->priv_size 0,8,32,40,48,56,88,112,120,144,160,224,240,256,296,616,624,728,736,1056,1128,1336,1616,2176,2240,2272,2560,3296,3720,9688-u64max
PARAM_VALUE 0 phy->mdio.mdio_read 4096-ptr_max
PARAM_VALUE 0 phy->ops 4096-ptr_max
PARAM_VALUE 0 *phy->mdio.dev->priv->mcdi->iface.logging_buffer 0-255
PARAM_VALUE 1 mmd 1
PARAM_VALUE 2 wait 0
DATA_SOURCE 0 phy $0
RX_PATH
TASK_NOT_RUNNING

drivers/net/ethernet/chelsio/cxgb3/ael1002.c ael2020_reset() -> t3_phy_reset()

Type Parameter Key Value
PARAM_VALUE 0 phy 4096-ptr_max
PARAM_VALUE 0 phy->mdio.dev->priv->mcdi->iface.proxy_rx_status s32min-s32max
PARAM_VALUE 0 phy->mdio.dev->priv->mcdi->iface.resprc s32min-s32max
PARAM_VALUE 0 phy->mdio.dev->rtnl_link_ops->priv_size 0,8,32,40,48,56,88,112,120,144,160,224,240,256,296,616,624,728,736,1056,1128,1336,1616,2176,2240,2272,2560,3296,3720,9688-u64max
PARAM_VALUE 0 phy->mdio.mdio_read 4096-ptr_max
PARAM_VALUE 0 phy->ops 4096-ptr_max
PARAM_VALUE 0 *phy->mdio.dev->priv->mcdi->iface.logging_buffer 0-255
PARAM_VALUE 1 mmd 1
PARAM_VALUE 2 wait 125
DATA_SOURCE 0 phy $0
RX_PATH
TASK_NOT_RUNNING

drivers/net/ethernet/chelsio/cxgb3/vsc8211.c vsc8211_reset() -> t3_phy_reset()

Type Parameter Key Value
PARAM_VALUE 0 phy 4096-ptr_max
PARAM_VALUE 0 phy->ops 4096-ptr_max
PARAM_VALUE 0 phy->ops->advertise 0,649376033782411264,2404812733431848960,2540912140408807424,3618025877140574208
PARAM_VALUE 0 phy->ops->autoneg_enable 0,1004985555197882368,6622013278111358976,7187434250706907136
PARAM_VALUE 0 phy->ops->autoneg_restart 0,2213105672276566016,6322157740691988480,6874546177707233280
PARAM_VALUE 0 phy->ops->get_link_status 4096-ptr_max
PARAM_VALUE 0 phy->ops->intr_clear 1077288658560163840,3064585341224726528,4259336510807121920,8005133043804102656,8709669609001213952,8967481666791227392
PARAM_VALUE 0 phy->ops->intr_disable 753623859439067136,1092259470721908736,4028279791895539712,5453225306120396800,8005133043804102656,8639274757380960256
PARAM_VALUE 0 phy->ops->intr_enable 2286237873095716864,4046484139013865472,6710367905129889792,6907112116199739392,8005133043804102656,8401734841145663488
PARAM_VALUE 0 phy->ops->intr_handler 447998229378408448,1434027663638069248,2804849316262830080,3379872228276600832,3562382241797099520,8005133043804102656
PARAM_VALUE 0 phy->ops->mmds 0,26,30
PARAM_VALUE 0 phy->ops->power_down 1903986306670891008,5193892545153163264,5631994182193192960,9091544627583520768
PARAM_VALUE 0 phy->ops->reset 4096-ptr_max
PARAM_VALUE 0 phy->ops->set_loopback 0,3161867578357600256,3307759222686691328,5087526462231187456,7712409708981108736
PARAM_VALUE 0 phy->ops->set_speed_duplex 0,280185800770498560,3549997963514085376,5868573137945227264
PARAM_VALUE 1 mmd (-1)
PARAM_VALUE 2 wait 0
BUF_SIZE 0 phy->desc (-1),11
BUF_SIZE 0 phy->ops (-1),104
DATA_SOURCE 0 phy $0
STR_LEN 0 phy->desc (-1),10
RX_PATH
TASK_NOT_RUNNING
HOST_DATA 0 phy->adapter->cm.width 0-3
HOST_DATA 0 phy->adapter->mc5.part_type 0-7[c]
HOST_DATA 0 phy->adapter->params.pci.width 0[c]
HOST_DATA 0 phy->adapter->params.rev 0-u32max
HOST_DATA 0 phy->adapter->pmrx.width 0-3
HOST_DATA 0 phy->adapter->pmtx.width 0-3
NO_OVERFLOW_SIMPLE 0 phy->adapter->params.vpd.cclk
NO_OVERFLOW_SIMPLE 0 phy->adapter->params.vpd.mclk
NO_OVERFLOW_SIMPLE 0 phy->adapter->params.vpd.mdc
NO_OVERFLOW_SIMPLE 0 phy->adapter->params.vpd.mem_timing
NO_OVERFLOW_SIMPLE 0 phy->adapter->params.vpd.uclk

drivers/net/ethernet/chelsio/cxgb3/aq100x.c aq100x_reset() -> t3_phy_reset()

Type Parameter Key Value
PARAM_VALUE 0 phy 4096-ptr_max
PARAM_VALUE 0 phy->ops 4096-ptr_max
PARAM_VALUE 1 mmd 30
PARAM_VALUE 2 wait 3000
DATA_SOURCE 0 phy $0
RX_PATH
TASK_NOT_RUNNING