Defined in 1 files as a function:

Referenced in 1 files:

Smatch caller information:

drivers/tty/serial/8250/8250_pci.c pciserial_init_ports() -> (struct pci_serial_quirk)->setup()

Type Parameter Key Value
PARAM_VALUE 0 priv 4096-ptr_max
PARAM_VALUE 0 priv->dev 4096-ptr_max
PARAM_VALUE 0 priv->dev->subordinate->self->link_bwctrl->cdev 0,4096-s64max
PARAM_VALUE 0 priv->quirk 3767118380281921536-ptr_max
PARAM_VALUE 1 board 4096-ptr_max
PARAM_VALUE 1 board->flags 0-5,8-13,128,256
PARAM_VALUE 1 board->reg_shift 0,2,4,7
PARAM_VALUE 2 port 5066417044628500480
PARAM_VALUE 2 port->port.dev 4096-ptr_max
PARAM_VALUE 2 port->port.flags 67108864,134217728,268435520,285212736,671088640,2147483648,4294967296
PARAM_VALUE 2 port->port.get_divisor 0,1251506559648477184
PARAM_VALUE 2 port->port.handle_break 0,6055914765528334336
PARAM_VALUE 2 port->port.iobase 0
PARAM_VALUE 2 port->port.iotype (-1)-255
PARAM_VALUE 2 port->port.port_id 0-s32max
PARAM_VALUE 2 port->port.private_data 0,4096-ptr_max
PARAM_VALUE 2 port->port.quirks 0-1
PARAM_VALUE 2 port->port.regshift 0,2,4,7
PARAM_VALUE 2 port->port.rs485_supported.delay_rts_after_send 0
PARAM_VALUE 2 port->port.rs485_supported.delay_rts_before_send 0
PARAM_VALUE 2 port->port.rs485_supported.flags 0
PARAM_VALUE 2 port->port.serial_in 0,5509307084229816320
PARAM_VALUE 2 port->port.serial_out 0,8762971863838597120
PARAM_VALUE 2 port->port.set_divisor 0,2274563138285285376
PARAM_VALUE 2 port->port.set_mctrl 0,1461087126822948864
PARAM_VALUE 2 port->port.type 0,4,12,15,25,121
PARAM_VALUE 3 idx 0-s32max
BUF_SIZE 0 priv 32-u64max
BUF_SIZE 0 priv 32-u64max
BUF_SIZE 0 priv->dev (-1),16,24,40,56,108-1096,1384,1600,1616,1752,2072,2576,7472,8064
BUF_SIZE 0 priv->quirk (-1),4608
BUF_SIZE 1 board (-1),24
BUF_SIZE 1 board (-1),24
CAPPED_DATA 3 idx 1
DATA_SOURCE 0 priv r _kzalloc_noprof
DATA_SOURCE 1 board $1
MEM_ZERO 2 port
RX_PATH
TASK_NOT_RUNNING
HOST_DATA 0 priv->dev->current_state 0-3[c]
HOST_DATA 2 port->port.iobase 0
HALF_LOCKED2 &dev->dev.mutex