Defined in 1 files as a prototype:
Defined in 1 files as a function:
Referenced in 1 files:
Smatch caller information:
drivers/net/ethernet/intel/igb/e1000_82575.c igb_get_link_up_info_82575() -> igb_get_speed_and_duplex_copper()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | hw | 4096-ptr_max |
| PARAM_VALUE | 0 | hw->phy.media_type | 1 |
| PARAM_VALUE | 0 | *hw->mac.perm_addr | 0-255 |
| PARAM_VALUE | 1 | speed | 4096-ptr_max |
| PARAM_VALUE | 2 | duplex | 4096-ptr_max |
| BUF_SIZE | 0 | hw | (-1),1200 |
| BUF_SIZE | 0 | hw | (-1),1200 |
| DATA_SOURCE | 0 | hw | $0 |
| DATA_SOURCE | 1 | speed | $1 |
| DATA_SOURCE | 2 | duplex | $2 |
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| HOST_DATA | 0 | hw->bus.func | 0-u16max[c] |
| HOST_DATA | 0 | hw->bus.width | 0-s32max[c] |
| HOST_DATA | 0 | hw->fc.high_water | 0,8-65528[c] |
| HOST_DATA | 0 | hw->fc.low_water | 0-65520,4294967288[c] |
| HOST_DATA | 0 | hw->mac.ledctl_default | 0-u32max |
| HOST_DATA | 0 | hw->mac.ledctl_mode1 | 0-u32max |
| HOST_DATA | 0 | hw->mac.ledctl_mode2 | 0-u32max |
| HOST_DATA | 0 | hw->nvm.flash_bank_size | 0,1024-8388608,1065355264-1073740800[c] |
| HOST_DATA | 0 | hw->nvm.flash_base_addr | 0,4096-33550336[c] |
| HOST_DATA | 0 | hw->phy.addr | 0-31[c] |
| HOST_DATA | 0 | hw->phy.cable_length | 0-254,256-u16max[c] |
| HOST_DATA | 0 | hw->phy.id | 0-u32max |
| HOST_DATA | 0 | hw->phy.is_mdix | 0-1 |
| HOST_DATA | 0 | hw->phy.polarity_correction | 0-1 |
| HOST_DATA | 0 | hw->phy.revision | 0-15 |
| HOST_DATA | 0 | hw->phy.speed_downgraded | 0-1 |
| HALF_LOCKED2 | 0 | &hw->mbx_lock |