Defined in 1 files as a function:
Referenced in 1 files:
Smatch caller information:
drivers/i2c/busses/i2c-designware-common.c i2c_dw_init() -> i2c_dw_configure_mode()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | dev | 4096-ptr_max |
| PARAM_VALUE | 0 | dev->dev->power.wakeirq->status | 0-4294967295 |
| PARAM_VALUE | 0 | dev->map | 4096-ptr_max |
| PARAM_VALUE | 0 | dev->map->cache_dirty | 0-1 |
| PARAM_VALUE | 0 | dev->status | 0,2-4294967294 |
| PARAM_VALUE | 0 | *dev->map->cache->data | 0-4294967295 |
| BUF_SIZE | 0 | dev | s32min-(-2),1-s32max |
| BUF_SIZE | 0 | dev | s32min-(-2),1-s32max |
| BUF_SIZE | 0 | dev->clk | (-1),1-s32max |
| BUF_SIZE | 0 | dev->dev | (-1),1616 |
| BUF_SIZE | 0 | dev->pclk | (-1),1-s32max |
| BUF_SIZE | 0 | dev->rst | (-1),8,280 |
| DATA_SOURCE | 0 | dev | $0 |
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| NOCHECK_CALL | |||
| NO_OVERFLOW_SIMPLE | 0 | dev->clk->core->parent->req_rate | |
| NO_OVERFLOW_SIMPLE | 0 | dev->pclk->core->parent->req_rate | |
| UNITS | 0 | dev | unit_byte |
drivers/i2c/busses/i2c-designware-common.c i2c_dw_set_mode() -> i2c_dw_configure_mode()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | dev | 4096-ptr_max |
| PARAM_VALUE | 0 | dev->dev->power.wakeirq->status | 0-4294967295 |
| PARAM_VALUE | 1 | mode | 0-1 |
| BUF_SIZE | 0 | dev | s32min-(-2),1-s32max |
| BUF_SIZE | 0 | dev | s32min-(-2),1-s32max |
| BUF_SIZE | 0 | dev->slave | (-1),1696 |
| DATA_SOURCE | 0 | dev | $0 |
| DATA_SOURCE | 1 | mode | $1 [m] |
| FUZZY_MAX | 1 | mode | 0 |
| PARAM_COMPARE | 0 | dev->mode | != $1 |
| PARAM_COMPARE | 1 | mode | != $0->mode |
| HARD_MAX | 1 | mode | 1 |
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| NOCHECK_CALL | |||
| NO_OVERFLOW_SIMPLE | 0 | dev->slave->init_irq | |
| NO_OVERFLOW_SIMPLE | 0 | dev->slave->irq | |
| UNITS | 0 | dev | unit_byte |