Documented in 1 files:
Defined in 1 files as a prototype:
Defined in 1 files as a function:
Referenced in 14 files:
- drivers/net/phy/adin1100.c, line 276
- drivers/net/phy/air_en8811h.c, line 1336
- drivers/net/phy/aquantia/aquantia_main.c, line 350
- drivers/net/phy/bcm84881.c, line 236
- drivers/net/phy/marvell-88q2xxx.c, line 458
- drivers/net/phy/marvell10g.c, line 865
- drivers/net/phy/mediatek/mtk-2p5ge.c, line 168
- drivers/net/phy/microchip_t1.c, line 1261
- drivers/net/phy/mxl-gpy.c
- drivers/net/phy/nxp-c45-tja11xx.c, line 1713
- drivers/net/phy/phy-c45.c, line 1240
- drivers/net/phy/phy_device.c, line 3725
- drivers/net/phy/qcom/qca808x.c, line 367
- drivers/net/phy/realtek/realtek_main.c
Smatch caller information:
drivers/net/phy/nxp-c45-tja11xx.c nxp_c45_get_features() -> genphy_c45_pma_read_abilities()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | phydev | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->probe | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->interrupts | 0 |
| PARAM_VALUE | 0 | phydev->mdio.reset_ctrl->deassert_count.counter | s32min-s32max |
| PARAM_VALUE | 0 | phydev->mdio.reset_state | 0 |
| PARAM_VALUE | 0 | phydev->supported | 4096-ptr_max |
| DATA_SOURCE | 0 | phydev | $0 |
| RX_PATH | |||
| TASK_NOT_RUNNING |
drivers/net/phy/mediatek/mtk-2p5ge.c mt798x_2p5ge_phy_get_features() -> genphy_c45_pma_read_abilities()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | phydev | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->probe | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->interrupts | 0 |
| PARAM_VALUE | 0 | phydev->mdio.reset_ctrl->deassert_count.counter | s32min-s32max |
| PARAM_VALUE | 0 | phydev->mdio.reset_state | 0 |
| DATA_SOURCE | 0 | phydev | $0 |
| RX_PATH | |||
| TASK_NOT_RUNNING |
drivers/net/phy/aquantia/aquantia_main.c aqr105_get_features() -> genphy_c45_pma_read_abilities()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | phydev | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->probe | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->interrupts | 0 |
| PARAM_VALUE | 0 | phydev->mdio.reset_ctrl->deassert_count.counter | s32min-s32max |
| PARAM_VALUE | 0 | phydev->mdio.reset_state | 0 |
| DATA_SOURCE | 0 | phydev | $0 |
| RX_PATH | |||
| TASK_NOT_RUNNING |
drivers/net/phy/marvell-88q2xxx.c mv88q2xxx_get_features() -> genphy_c45_pma_read_abilities()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | phydev | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->probe | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->interrupts | 0 |
| PARAM_VALUE | 0 | phydev->mdio.reset_ctrl->deassert_count.counter | s32min-s32max |
| PARAM_VALUE | 0 | phydev->mdio.reset_state | 0 |
| DATA_SOURCE | 0 | phydev | $0 |
| RX_PATH | |||
| TASK_NOT_RUNNING |
drivers/net/phy/marvell10g.c mv3310_get_features() -> genphy_c45_pma_read_abilities()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | phydev | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->probe | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->interrupts | 0 |
| PARAM_VALUE | 0 | phydev->mdio.reset_ctrl->deassert_count.counter | s32min-s32max |
| PARAM_VALUE | 0 | phydev->mdio.reset_state | 0 |
| DATA_SOURCE | 0 | phydev | $0 |
| RX_PATH | |||
| TASK_NOT_RUNNING |
drivers/net/phy/qcom/qca808x.c qca808x_get_features() -> genphy_c45_pma_read_abilities()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | phydev | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->probe | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->interrupts | 0 |
| PARAM_VALUE | 0 | phydev->mdio.reset_ctrl->deassert_count.counter | s32min-s32max |
| PARAM_VALUE | 0 | phydev->mdio.reset_state | 0 |
| DATA_SOURCE | 0 | phydev | $0 |
| RX_PATH | |||
| TASK_NOT_RUNNING |
drivers/net/phy/microchip_t1.c lan887x_get_features() -> genphy_c45_pma_read_abilities()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | phydev | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->probe | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->interrupts | 0 |
| PARAM_VALUE | 0 | phydev->mdio.reset_ctrl->deassert_count.counter | s32min-s32max |
| PARAM_VALUE | 0 | phydev->mdio.reset_state | 0 |
| DATA_SOURCE | 0 | phydev | $0 |
| RX_PATH | |||
| TASK_NOT_RUNNING |
drivers/net/phy/phy_device.c phy_probe() -> genphy_c45_pma_read_abilities()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | phydev | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->probe | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->interrupts | 0 |
| PARAM_VALUE | 0 | phydev->is_c45 | 1 |
| PARAM_VALUE | 0 | phydev->mdio.reset_ctrl->deassert_count.counter | s32min-s32max |
| PARAM_VALUE | 0 | phydev->mdio.reset_state | 0 |
| RX_PATH | |||
| TASK_NOT_RUNNING |
drivers/net/phy/realtek/realtek_main.c rtl822x_c45_get_features() -> genphy_c45_pma_read_abilities()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | phydev | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->probe | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->interrupts | 0 |
| PARAM_VALUE | 0 | phydev->mdio.reset_ctrl->deassert_count.counter | s32min-s32max |
| PARAM_VALUE | 0 | phydev->mdio.reset_state | 0 |
| PARAM_VALUE | 0 | phydev->supported | 4096-ptr_max |
| DATA_SOURCE | 0 | phydev | $0 |
| RX_PATH | |||
| TASK_NOT_RUNNING |
drivers/net/phy/realtek/realtek_main.c rtl8261x_get_features() -> genphy_c45_pma_read_abilities()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | phydev | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->probe | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->interrupts | 0 |
| PARAM_VALUE | 0 | phydev->mdio.reset_ctrl->deassert_count.counter | s32min-s32max |
| PARAM_VALUE | 0 | phydev->mdio.reset_state | 0 |
| DATA_SOURCE | 0 | phydev | $0 |
| RX_PATH | |||
| TASK_NOT_RUNNING |
drivers/net/phy/adin1100.c adin_get_features() -> genphy_c45_pma_read_abilities()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | phydev | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->probe | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->read_mmd | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->interrupts | 0 |
| PARAM_VALUE | 0 | phydev->mdio.bus | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->mdio.bus->mdio_lock.dep_map->name | 0-255 |
| PARAM_VALUE | 0 | phydev->mdio.bus->mdio_lock.first_waiter->list.prev->next | 5159360019465732096 |
| PARAM_VALUE | 0 | phydev->mdio.bus->mdio_lock.first_waiter->task->blocked_lock.dep_map->name | 0-255 |
| PARAM_VALUE | 0 | phydev->mdio.bus->mdio_lock.first_waiter->task->blocked_lock.owner | (-1) |
| PARAM_VALUE | 0 | phydev->mdio.bus->mdio_lock.first_waiter->task->blocked_lock.owner_cpu | 4294967295 |
| PARAM_VALUE | 0 | phydev->mdio.bus->mdio_lock.first_waiter->task->blocked_lock.raw_lock.val.counter | s32min-s32max |
| PARAM_VALUE | 0 | phydev->mdio.bus->mdio_lock.first_waiter->task->blocked_on | 0 |
| PARAM_VALUE | 0 | phydev->mdio.bus->mdio_lock.first_waiter->task->usage.refs.counter | s32min-s32max |
| PARAM_VALUE | 0 | phydev->mdio.reset_ctrl->deassert_count.counter | s32min-s32max |
| PARAM_VALUE | 0 | phydev->mdio.reset_state | 0 |
| PARAM_VALUE | 0 | phydev->priv | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->supported | 4096-ptr_max |
| DATA_SOURCE | 0 | phydev | $0 |
| RX_PATH | |||
| TASK_NOT_RUNNING |
drivers/net/phy/air_en8811h.c en8811h_get_features() -> genphy_c45_pma_read_abilities()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | phydev | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->probe | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->interrupts | 0 |
| PARAM_VALUE | 0 | phydev->mdio.reset_ctrl->deassert_count.counter | s32min-s32max |
| PARAM_VALUE | 0 | phydev->mdio.reset_state | 0 |
| PARAM_VALUE | 0 | phydev->supported | 4096-ptr_max |
| DATA_SOURCE | 0 | phydev | $0 |
| RX_PATH | |||
| TASK_NOT_RUNNING |
drivers/net/phy/bcm84881.c bcm84881_get_features() -> genphy_c45_pma_read_abilities()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | phydev | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->probe | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->interrupts | 0 |
| PARAM_VALUE | 0 | phydev->mdio.reset_ctrl->deassert_count.counter | s32min-s32max |
| PARAM_VALUE | 0 | phydev->mdio.reset_state | 0 |
| DATA_SOURCE | 0 | phydev | $0 |
| RX_PATH | |||
| TASK_NOT_RUNNING |
drivers/net/phy/phy_device.c phy_probe() -> (struct phy_driver)->get_features()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | phydev | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv | 4096-ptr_max |
| PARAM_VALUE | 0 | phydev->drv->probe | 0,4096-ptr_max |
| PARAM_VALUE | 0 | phydev->interrupts | 0 |
| PARAM_VALUE | 0 | phydev->mdio.reset_ctrl->deassert_count.counter | s32min-s32max |
| PARAM_VALUE | 0 | phydev->mdio.reset_state | 0 |
| RX_PATH | |||
| TASK_NOT_RUNNING |