Documented in 1 files:
Defined in 1 files as a function:
Referenced in 2 files:
Smatch caller information:
drivers/i2c/busses/i2c-qcom-geni.c geni_i2c_rx_one_msg() -> geni_se_setup_m_cmd()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | se | 4096-ptr_max |
| PARAM_VALUE | 1 | cmd | 2 |
| PARAM_VALUE | 2 | params | 0,4,512-65028 |
| BUF_SIZE | 0 | se | 120 |
| DATA_SOURCE | 2 | params | $2 |
| BIT_INFO | 2 | params | 0x0,0xfe04 |
| RX_PATH | |||
| NOCHECK_CALL |
drivers/i2c/busses/i2c-qcom-geni.c geni_i2c_tx_one_msg() -> geni_se_setup_m_cmd()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | se | 4096-ptr_max |
| PARAM_VALUE | 1 | cmd | 1 |
| PARAM_VALUE | 2 | params | 0,4,512-65028 |
| BUF_SIZE | 0 | se | 120 |
| DATA_SOURCE | 2 | params | $2 |
| BIT_INFO | 2 | params | 0x0,0xfe04 |
| NOCHECK_CALL |
drivers/spi/spi-geni-qcom.c setup_se_xfer() -> geni_se_setup_m_cmd()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | se | 4096-ptr_max |
| PARAM_VALUE | 1 | cmd | 0-3 |
| PARAM_VALUE | 2 | params | 0,4 |
| BUF_SIZE | 0 | se | 120 |
| FUZZY_MAX | 1 | cmd | 0 |
| FUZZY_MAX | 2 | params | 4 |
| BIT_INFO | 2 | params | 0x0,0x4 |
| HARD_MAX | 2 | params | 4 |
| PREEMPT_ADD | <- disables preempt | ||
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| NOCHECK_CALL | |||
| LOCK2 | &mas->lock | ||
| LOCK2 | &spi->io_mutex | ||
| LOCK2 | irq | ||
| HALF_LOCKED2 | &spi->dev.driver_data->op_lock | ||
| TYPE_LOCK | (struct spi_controller)->io_mutex | ||
| TYPE_LOCK | (struct spi_geni_master)->lock |