Documented in 1 files:
Defined in 1 files as a prototype:
Defined in 1 files as a function:
Referenced in 2 files:
Smatch caller information:
drivers/net/ethernet/intel/e1000e/ethtool.c e1000_set_link_ksettings() -> e1000e_down()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | adapter | 4096-ptr_max |
| PARAM_VALUE | 0 | adapter->hw.mac.forced_speed_duplex | 1-2,4,8,32 |
| PARAM_VALUE | 0 | adapter->hw.phy.mdix | 0-2,4-255 |
| PARAM_VALUE | 0 | adapter->netdev | 4096-ptr_max |
| PARAM_VALUE | 1 | reset | 1 |
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| NOCHECK_CALL |
drivers/net/ethernet/intel/e1000e/ethtool.c e1000_set_pauseparam() -> e1000e_down()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | adapter | 4096-ptr_max |
| PARAM_VALUE | 0 | adapter->fc_autoneg | 1 |
| PARAM_VALUE | 0 | adapter->hw.fc.requested_mode | 255 |
| PARAM_VALUE | 0 | adapter->netdev | 4096-ptr_max |
| PARAM_VALUE | 1 | reset | 1 |
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| NOCHECK_CALL |
drivers/net/ethernet/intel/e1000e/ethtool.c e1000_set_ringparam() -> e1000e_down()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | adapter | 4096-ptr_max |
| PARAM_VALUE | 0 | adapter->netdev | 4096-ptr_max |
| PARAM_VALUE | 1 | reset | 1 |
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| NOCHECK_CALL |
drivers/net/ethernet/intel/e1000e/ethtool.c e1000e_set_priv_flags() -> e1000e_down()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | adapter | 4096-ptr_max |
| PARAM_VALUE | 0 | adapter->netdev | 4096-ptr_max |
| PARAM_VALUE | 1 | reset | 1 |
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| NOCHECK_CALL |
drivers/net/ethernet/intel/e1000e/netdev.c e1000_change_mtu() -> e1000e_down()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | adapter | 4096-ptr_max |
| PARAM_VALUE | 1 | reset | 1 |
| BIT_INFO | 0 | adapter->max_frame_size | 0x0,0x7fffffff |
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| NOCHECK_CALL |
drivers/net/ethernet/intel/e1000e/netdev.c e1000e_close() -> e1000e_down()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | adapter | 4096-ptr_max |
| PARAM_VALUE | 0 | adapter->pdev->dev.bus | 0,4096-ptr_max |
| PARAM_VALUE | 0 | adapter->pdev->dev.class | 0,4096-ptr_max |
| PARAM_VALUE | 0 | adapter->pdev->dev.power.request | 0-4 |
| PARAM_VALUE | 0 | adapter->pdev->dev.power.runtime_error | s32min-(-17),(-15)-(-14),(-12),(-10)-s32max |
| PARAM_VALUE | 0 | adapter->pdev->dev.power.wakeirq | 0,4096-ptr_max |
| PARAM_VALUE | 0 | adapter->pdev->dev.power.wakeirq->status | 0-4294967295 |
| PARAM_VALUE | 0 | adapter->pdev->dev.type | 0,4096-ptr_max |
| PARAM_VALUE | 1 | reset | 1 |
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| NOCHECK_CALL | |||
| HALF_LOCKED2 | &netdev->lock | ||
| HALF_LOCKED2 | &rdev->wiphy.mtx | ||
| HALF_LOCKED2 | global &rtnl_mutex |
drivers/net/ethernet/intel/e1000e/netdev.c e1000e_pm_freeze() -> e1000e_down()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | adapter | 4096-ptr_max |
| PARAM_VALUE | 1 | reset | 0 |
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| NOCHECK_CALL | |||
| LOCK2 | global &rtnl_mutex | ||
| HALF_LOCKED2 | &dev->mutex |
drivers/net/ethernet/intel/e1000e/netdev.c e1000e_pm_runtime_suspend() -> e1000e_down()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | adapter | 4096-ptr_max |
| PARAM_VALUE | 1 | reset | 0 |
| NOCHECK_CALL |
drivers/net/ethernet/intel/e1000e/netdev.c e1000e_reinit_locked() -> e1000e_down()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | adapter | 4096-ptr_max |
| PARAM_VALUE | 1 | reset | 1 |
| DATA_SOURCE | 0 | adapter | $0 |
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| NOCHECK_CALL | |||
| HALF_LOCKED2 | global &rtnl_mutex |