Open Menu /

Defined in 1 files as a prototype:

Defined in 1 files as a function:

Referenced in 2 files:

Smatch caller information:

drivers/net/ethernet/intel/e1000/e1000_main.c e1000_open() -> e1000_power_up_phy()

Type Parameter Key Value
PARAM_VALUE 0 adapter 4096-ptr_max
PARAM_VALUE 0 adapter->pdev->dev.cma_area->alloc_mutex.first_waiter->list.prev->next 5159360019465732096
PARAM_VALUE 0 adapter->pdev->dev.cma_area->alloc_mutex.first_waiter->list.prev->prev 5159360019465732096
PARAM_VALUE 0 adapter->pdev->dev.cma_area->alloc_mutex.osq.tail.counter 0-s32max
PARAM_VALUE 0 adapter->pdev->dev.dma_io_tlb_pools.next 4096-ptr_max
PARAM_VALUE 0 adapter->pdev->dev.dma_io_tlb_pools.next->prev 4096-ptr_max
PARAM_VALUE 0 adapter->pdev->dev.dma_io_tlb_pools.next->prev->prev 4096-ptr_max
PARAM_VALUE 0 adapter->pdev->dev.dma_mem->spinlock.rlock.dep_map->name 0-255
PARAM_VALUE 0 adapter->pdev->dev.dma_uses_io_tlb 1
PARAM_VALUE 0 adapter->pdev->dev.iommu->pci_32bit_workaround 0-1
PARAM_VALUE 0 *adapter->netdev->name 0-255
CAPPED_DATA 0 adapter->num_rx_queues 1
CAPPED_DATA 0 adapter->num_tx_queues 1
RX_PATH
TASK_NOT_RUNNING
NOCHECK_CALL
HALF_LOCKED2 global &rtnl_mutex

drivers/net/ethernet/intel/e1000/e1000_main.c e1000_resume() -> e1000_power_up_phy()

Type Parameter Key Value
PARAM_VALUE 0 adapter 4096-ptr_max
RX_PATH
TASK_NOT_RUNNING
NOCHECK_CALL

drivers/net/ethernet/intel/e1000/e1000_ethtool.c e1000_diag_test() -> e1000_power_up_phy()

Type Parameter Key Value
PARAM_VALUE 0 adapter 4096-ptr_max
PARAM_VALUE 0 adapter->hw.autoneg_failed 0
PARAM_VALUE 0 adapter->hw.dsp_config_state 0-4294967295
PARAM_VALUE 0 adapter->hw.fc_high_water 0,8-65528
PARAM_VALUE 0 adapter->hw.fc_low_water 0-65520,65528
PARAM_VALUE 0 adapter->hw.fc_pause_time u16max
PARAM_VALUE 0 adapter->hw.fc_send_xon 1
PARAM_VALUE 0 adapter->hw.ffe_config_state 0-4294967295
PARAM_VALUE 0 adapter->hw.mac_type 1-14
PARAM_VALUE 0 adapter->hw.media_type 0-4294967295
PARAM_VALUE 0 adapter->hw.mng_cookie.status 0-255
PARAM_VALUE 0 adapter->hw.original_fc 0-4294967295
PARAM_VALUE 0 adapter->hw.original_master_slave 0-4294967295
PARAM_VALUE 0 adapter->hw.phy_id 0-4294967295
PARAM_VALUE 0 adapter->hw.phy_reset_disable 0-1
PARAM_VALUE 0 adapter->hw.phy_revision 0-4294967295
PARAM_VALUE 0 adapter->hw.phy_type 0-4294967295
PARAM_VALUE 0 adapter->hw.tbi_compatibility_en 0
PARAM_VALUE 0 adapter->hw.txcw 2147483680,2147483936,2147484064
PARAM_VALUE 0 adapter->link_duplex 0-u16max
PARAM_VALUE 0 adapter->link_speed 0-u16max
PARAM_VALUE 0 adapter->napi.config->defer_hard_irqs 0-4294967295
PARAM_VALUE 0 adapter->napi.timer.is_queued 0-1
PARAM_VALUE 0 adapter->pdev 4096-ptr_max
PARAM_VALUE 0 adapter->phy_info.cable_length 255
PARAM_VALUE 0 adapter->phy_info.cable_polarity 0-1,255
PARAM_VALUE 0 adapter->phy_info.downshift 0-1,255
PARAM_VALUE 0 adapter->phy_info.extended_10bt_distance 0-1,255
PARAM_VALUE 0 adapter->phy_info.local_rx 255
PARAM_VALUE 0 adapter->phy_info.mdix_mode 0-s32max
PARAM_VALUE 0 adapter->phy_info.polarity_correction 0-1,255
PARAM_VALUE 0 adapter->phy_info.remote_rx 255
PARAM_VALUE 0 adapter->tx_fifo_head 0
PARAM_VALUE 0 adapter->tx_fifo_size 0,10240,18432
PARAM_VALUE 0 adapter->tx_fifo_stall.counter 0
PARAM_VALUE 0 adapter->tx_head_addr 2816,3840,5120
PARAM_VALUE 0 *adapter->netdev->name 0-255
BIT_INFO 0 adapter->msg_enable 0x0,0xffffffff
NOCHECK_CALL
HOST_DATA 0 adapter->hw.eeprom.word_size 64[c]
HOST_DATA 0 adapter->hw.ledctl_default 0-u32max
HOST_DATA 0 adapter->hw.ledctl_mode1 0-u32max
HOST_DATA 0 adapter->hw.ledctl_mode2 0-u32max
HOST_DATA 0 adapter->hw.phy_addr 0-u32max
HOST_DATA 0 adapter->hw.phy_id 0-u32max
HOST_DATA 0 adapter->hw.phy_revision 0-15
HOST_DATA 0 adapter->phy_info.cable_length 255[c]
HOST_DATA 0 adapter->phy_info.mdix_mode 0-s32max[c]