Documented in 1 files:
Defined in 1 files as a prototype:
Defined in 2 files as a function:
- drivers/usb/dwc3/core.h, line 1699 (as a function)
- drivers/usb/dwc3/gadget.c, line 746 (as a function)
Referenced in 1 files:
Smatch caller information:
drivers/usb/dwc3/ep0.c dwc3_ep0_set_config() -> dwc3_gadget_clear_tx_fifos()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | dwc | 4096-ptr_max |
| PARAM_VALUE | 0 | dwc->connected | 1 |
| PARAM_VALUE | 0 | dwc->dev->power.wakeirq->status | 0-4294967295 |
| PARAM_VALUE | 0 | dwc->ep0_next_event | 2-3 |
| PARAM_VALUE | 0 | dwc->ep0_trb | 4096-ptr_max |
| PARAM_VALUE | 0 | dwc->ep0state | 1 |
| PARAM_VALUE | 0 | dwc->eps | 4096-ptr_max |
| PARAM_VALUE | 0 | dwc->gadget | 4096-ptr_max |
| PARAM_VALUE | 0 | dwc->gadget_driver | 1-u64max |
| PARAM_VALUE | 0 | dwc->setup_packet_pending | 0 |
| PARAM_VALUE | 0 | dwc->softconnect | 1 |
| DATA_SOURCE | 0 | dwc | $0 |
| FUZZY_MAX | 0 | dwc->ep0_next_event | 3 |
| BIT_INFO | 0 | dwc->ep0_next_event | 0x2,0x3 |
| HARD_MAX | 0 | dwc->ep0_next_event | 3 |
| PREEMPT_ADD | |||
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| NOCHECK_CALL | |||
| HOST_DATA | 0 | dwc->speed | 0-7 |
| HOST_DATA | 0 | dwc->u1u2 | 0,512-7680[c] |
| LOCK2 | &dwc->lock | ||
| LOCK2 | bh | ||
| LOCK2 | flags | ||
| HALF_LOCKED2 | _T->lock | ||
| TYPE_LOCK | (struct dwc3)->lock |