Defined in 1 files as a prototype:
Defined in 2 files as a function:
- drivers/gpu/drm/i915/display/intel_dpio_phy.c, line 715 (as a function)
- drivers/gpu/drm/i915/display/intel_dpio_phy.h, line 130 (as a function)
Referenced in 2 files:
Smatch caller information:
drivers/gpu/drm/i915/display/g4x_hdmi.c chv_hdmi_pre_enable() -> chv_set_phy_signal_level()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | encoder | 4096-ptr_max |
| PARAM_VALUE | 1 | crtc_state | 4096-ptr_max |
| PARAM_VALUE | 1 | crtc_state->intel_dpll->info->id | 0-32 |
| PARAM_VALUE | 2 | deemph_reg_value | 128 |
| PARAM_VALUE | 3 | margin_reg_value | 102 |
| PARAM_VALUE | 4 | uniq_trans_scale | 0 |
| BUF_SIZE | 0 | encoder | (-1),728 |
| BUF_SIZE | 0 | encoder | (-1),728 |
| CAPPED_DATA | 1 | crtc_state->lane_count | 1 |
| DATA_SOURCE | 0 | encoder | $1 |
| DATA_SOURCE | 1 | crtc_state | $2 |
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| NOCHECK_CALL |
drivers/gpu/drm/i915/display/g4x_dp.c chv_set_signal_levels() -> chv_set_phy_signal_level()
| Type | Parameter | Key | Value |
|---|---|---|---|
| PARAM_VALUE | 0 | encoder | 4096-ptr_max |
| PARAM_VALUE | 1 | crtc_state | 4096-ptr_max |
| PARAM_VALUE | 1 | crtc_state->intel_dpll->info->id | 0-32 |
| PARAM_VALUE | 2 | deemph_reg_value | 43,64,85,128 |
| PARAM_VALUE | 3 | margin_reg_value | 52,77-78,102,104,116,154 |
| BUF_SIZE | 0 | encoder | (-1),728 |
| BUF_SIZE | 0 | encoder | (-1),728 |
| DATA_SOURCE | 0 | encoder | $0 |
| DATA_SOURCE | 1 | crtc_state | $1 |
| FUZZY_MAX | 2 | deemph_reg_value | 128 |
| FUZZY_MAX | 3 | margin_reg_value | 154 |
| HARD_MAX | 2 | deemph_reg_value | 128 |
| HARD_MAX | 3 | margin_reg_value | 154 |
| RX_PATH | |||
| TASK_NOT_RUNNING | |||
| NOCHECK_CALL |