b43_device_enable identifier - Linux source code next-20260811

Projects

linux

Versions

FIXME
- FIXME
  - next-20260811

Defined in 1 files as a function:

drivers/net/wireless/broadcom/b43/b43.h, line 1015 (as a function)

Referenced in 2 files:

Smatch caller information:

drivers/net/wireless/broadcom/b43/main.c b43_bcma_wireless_core_reset() -> b43_device_enable()

Type	Parameter	Key	Value
PARAM_VALUE	0	wldev	4096-ptr_max
PARAM_VALUE	0	wldev->__init_status.counter	s32min-0,2-s32max
PARAM_VALUE	0	wldev->dev	4096-ptr_max
PARAM_VALUE	0	wldev->dev->bus_powerup	4096-ptr_max
PARAM_VALUE	0	wldev->dev->bus_type	0
PARAM_VALUE	0	wldev->dev->device_is_enabled	4096-ptr_max
PARAM_VALUE	0	wldev->phy.g->lo_control->bbatt_list.len	9
PARAM_VALUE	0	wldev->phy.g->lo_control->bbatt_list.list	144726016315772928
PARAM_VALUE	0	wldev->phy.g->lo_control->bbatt_list.max_val	8
PARAM_VALUE	0	wldev->phy.g->lo_control->rfatt_list.len	7,14
PARAM_VALUE	0	wldev->phy.g->lo_control->rfatt_list.list	3019603989279825920,3594635489906069504,7596049338479575040
PARAM_VALUE	0	wldev->phy.g->lo_control->rfatt_list.max_val	9,14
PARAM_VALUE	0	wldev->phy.n->iqcal_chanspec_2G.channel_type	0-3
PARAM_VALUE	0	wldev->phy.n->iqcal_chanspec_5G.channel_type	0-3
PARAM_VALUE	0	wldev->phy.n->rssical_chanspec_2G.channel_type	0-3
PARAM_VALUE	0	wldev->phy.n->rssical_chanspec_5G.channel_type	0-3
PARAM_VALUE	0	wldev->phy.n->txiqlocal_chanspec.channel_type	0-3
PARAM_VALUE	0	wldev->phy.ops->prepare_hardware	0,6979433902616084480
PARAM_VALUE	0	wldev->phy.ops->radio_read	4096-ptr_max
PARAM_VALUE	0	wldev->phy.ops->radio_write	4096-ptr_max
PARAM_VALUE	0	*wldev->dma_reason	0-4294967295
PARAM_VALUE	0	*wldev->phy.g->minlowsig	0-u16max
PARAM_VALUE	0	*wldev->phy.g->nrssi	s16min-s16max
PARAM_VALUE	0	*wldev->phy.g->nrssi_lt	(-128)-127
PARAM_VALUE	1	core_specific_flags	4,8196
DATA_SOURCE	0	wldev	$0
FUZZY_MAX	1	core_specific_flags	4
BIT_INFO	1	core_specific_flags	0x4,0x2004
RX_PATH
TASK_NOT_RUNNING
NOCHECK_CALL
HOST_DATA	0	wldev->phy.analog	0-15[c]
HOST_DATA	0	wldev->phy.g->cur_idle_tssi	0-u16max
HOST_DATA	0	wldev->phy.g->initval	32-543[c]
HOST_DATA	0	wldev->phy.g->lo_control->power_vector	1-u16max[c]
HOST_DATA	0	wldev->phy.g->nrssislope	(-4194304)-(-66576),66576-4194304[c]
HOST_DATA	0	wldev->phy.g->radio_off_context.rfover	0-u16max
HOST_DATA	0	wldev->phy.g->radio_off_context.rfoverval	0-u16max
HOST_DATA	0	wldev->phy.gmode	0-1
HOST_DATA	0	wldev->phy.n->classifier_state	0-7[c]
HOST_DATA	0	wldev->phy.radio_rev	0-255
HOST_DATA	0	wldev->phy.radio_ver	0-u16max
HOST_DATA	0	wldev->phy.rev	0-18
HOST_DATA	0	wldev->phy.supports_2ghz	0-1
HOST_DATA	0	wldev->phy.supports_5ghz	0-1
HOST_DATA	0	wldev->phy.type	2,4-5,7[c]
UNITS	0	wldev	unit_byte
HALF_LOCKED2		&wl->mutex

drivers/net/wireless/broadcom/b43/main.c b43_ssb_wireless_core_reset() -> b43_device_enable()

Type	Parameter	Key	Value
PARAM_VALUE	0	wldev	4096-ptr_max
PARAM_VALUE	0	wldev->__init_status.counter	s32min-0,2-s32max
PARAM_VALUE	0	wldev->dev	4096-ptr_max
PARAM_VALUE	0	wldev->dev->bus_powerup	4096-ptr_max
PARAM_VALUE	0	wldev->dev->bus_type	1
PARAM_VALUE	0	wldev->dev->device_is_enabled	4096-ptr_max
PARAM_VALUE	0	wldev->phy.g->lo_control->bbatt_list.len	9
PARAM_VALUE	0	wldev->phy.g->lo_control->bbatt_list.list	144726016315772928
PARAM_VALUE	0	wldev->phy.g->lo_control->bbatt_list.max_val	8
PARAM_VALUE	0	wldev->phy.g->lo_control->rfatt_list.len	7,14
PARAM_VALUE	0	wldev->phy.g->lo_control->rfatt_list.list	3019603989279825920,3594635489906069504,7596049338479575040
PARAM_VALUE	0	wldev->phy.g->lo_control->rfatt_list.max_val	9,14
PARAM_VALUE	0	wldev->phy.n->iqcal_chanspec_2G.channel_type	0-3
PARAM_VALUE	0	wldev->phy.n->iqcal_chanspec_5G.channel_type	0-3
PARAM_VALUE	0	wldev->phy.n->rssical_chanspec_2G.channel_type	0-3
PARAM_VALUE	0	wldev->phy.n->rssical_chanspec_5G.channel_type	0-3
PARAM_VALUE	0	wldev->phy.n->txiqlocal_chanspec.channel_type	0-3
PARAM_VALUE	0	wldev->phy.ops->prepare_hardware	0,6979433902616084480
PARAM_VALUE	0	wldev->phy.ops->radio_read	4096-ptr_max
PARAM_VALUE	0	wldev->phy.ops->radio_write	4096-ptr_max
PARAM_VALUE	0	*wldev->dma_reason	0-4294967295
PARAM_VALUE	0	*wldev->phy.g->minlowsig	0-u16max
PARAM_VALUE	0	*wldev->phy.g->nrssi	s16min-s16max
PARAM_VALUE	0	*wldev->phy.g->nrssi_lt	(-128)-127
PARAM_VALUE	1	core_specific_flags	786432,4980736,537657344,541851648
DATA_SOURCE	0	wldev	$0
BIT_INFO	1	core_specific_flags	0xc0000,0x204c0000
RX_PATH
TASK_NOT_RUNNING
NOCHECK_CALL
HOST_DATA	0	wldev->phy.analog	0-15[c]
HOST_DATA	0	wldev->phy.g->cur_idle_tssi	0-u16max
HOST_DATA	0	wldev->phy.g->initval	32-543[c]
HOST_DATA	0	wldev->phy.g->lo_control->power_vector	1-u16max[c]
HOST_DATA	0	wldev->phy.g->nrssislope	(-4194304)-(-66576),66576-4194304[c]
HOST_DATA	0	wldev->phy.g->radio_off_context.rfover	0-u16max
HOST_DATA	0	wldev->phy.g->radio_off_context.rfoverval	0-u16max
HOST_DATA	0	wldev->phy.gmode	0-1
HOST_DATA	0	wldev->phy.n->classifier_state	0-7[c]
HOST_DATA	0	wldev->phy.radio_rev	0-255
HOST_DATA	0	wldev->phy.radio_ver	0-u16max
HOST_DATA	0	wldev->phy.rev	0-18
HOST_DATA	0	wldev->phy.supports_2ghz	0-1
HOST_DATA	0	wldev->phy.supports_5ghz	0-1
HOST_DATA	0	wldev->phy.type	2,5,7[c]
UNITS	0	wldev	unit_byte
HALF_LOCKED2		&wl->mutex

drivers/net/wireless/broadcom/b43/rfkill.c b43_rfkill_poll() -> b43_device_enable()

Type	Parameter	Key	Value
PARAM_VALUE	0	wldev	4096-ptr_max
PARAM_VALUE	0	wldev->__init_status.counter	s32min-0
PARAM_VALUE	0	wldev->dev	4096-ptr_max
PARAM_VALUE	0	wldev->dev->bus_powerup	4096-ptr_max
PARAM_VALUE	1	core_specific_flags	0
NOCHECK_CALL
LOCK2		&pool->lock
LOCK2		&rdev->wiphy.mtx
LOCK2		&wl->mutex
TYPE_LOCK		(struct b43_wl)->mutex
TYPE_LOCK		(struct wiphy)->mtx