Open Menu /

Defined in 1 files as a function:

Referenced in 1 files:

Smatch caller information:

drivers/net/ethernet/amd/xgbe/xgbe-mdio.c xgbe_phy_config_aneg() -> __xgbe_phy_config_aneg()

Type Parameter Key Value
PARAM_VALUE 0 pdata 4096-ptr_max
PARAM_VALUE 0 pdata->i2c.op_state.op->cmd 0-1
PARAM_VALUE 0 pdata->i2c.op_state.op->len 1-3,5,128,256
PARAM_VALUE 0 pdata->netdev->rtnl_link_ops->priv_size 0,8,32,48,56,88,112,120,144,160,224,240,256,296,616,624,728,736,744,1056,1128,1336,1616,2176,2240,2272,2560,3296,3720,9688-s64max
PARAM_VALUE 0 pdata->vdata->ecc_support 0-1
PARAM_VALUE 0 pdata->vdata->enable_rrc 0-1
PARAM_VALUE 0 pdata->vdata->rx_desc_prefetch 0,5
PARAM_VALUE 0 pdata->vdata->tstamp_ptp_clock_freq 0-1
PARAM_VALUE 0 pdata->vdata->tx_desc_prefetch 0,5
PARAM_VALUE 0 pdata->vdata->xpcs_access 0-2
PARAM_VALUE 0 *pdata->pfcq 0-4294967295
PARAM_VALUE 0 *pdata->prio2q_map 0-4294967295
PARAM_VALUE 0 *pdata->q2tc_map 0-4294967295
PARAM_VALUE 0 *pdata->rx_rfa 0-4294967295
PARAM_VALUE 0 *pdata->rx_rfd 0-4294967295
PARAM_VALUE 1 set_mode 1
BUF_SIZE 0 pdata->an_workqueue (-1),512,528-8720
BUF_SIZE 0 pdata->dev_workqueue (-1),512,528-8720
DATA_SOURCE 0 pdata $0
STR_LEN 0 pdata->an_name (-1),46
STR_LEN 0 pdata->ecc_name (-1),46
STR_LEN 0 pdata->i2c_name (-1),46
NOSPEC 0 pdata->channel_count
NOSPEC 0 pdata->tx_q_count
NOSPEC 0 pdata->tx_ring_count
RX_PATH
TASK_NOT_RUNNING
USER_DATA 0 pdata->channel_count 1-s32max[c]
USER_DATA 0 pdata->netdev->num_tc 2-16[c]
USER_DATA 0 pdata->new_tx_ring_count 0[c]
USER_DATA 0 pdata->phy.autoneg 0
USER_DATA 0 pdata->phy.duplex 0-255
USER_DATA 0 pdata->phy.pause_autoneg s32min-s32max
USER_DATA 0 pdata->phy.rx_pause s32min-s32max
USER_DATA 0 pdata->phy.speed s32min-s32max
USER_DATA 0 pdata->phy.tx_pause s32min-s32max
USER_DATA 0 pdata->rx_buf_size 1536-4096[c]
USER_DATA 0 pdata->tx_q_count 1-u32max[c]
USER_DATA 0 pdata->tx_ring_count 1-u32max[c]
NO_OVERFLOW_SIMPLE 0 pdata->num_tcs
NO_OVERFLOW_SIMPLE 0 pdata->ptpclk->core->parent->req_rate
NO_OVERFLOW_SIMPLE 0 pdata->sysclk->core->parent->req_rate

drivers/net/ethernet/amd/xgbe/xgbe-mdio.c xgbe_phy_reconfig_aneg() -> __xgbe_phy_config_aneg()

Type Parameter Key Value
PARAM_VALUE 0 pdata 4096-ptr_max
PARAM_VALUE 0 pdata->an_again 1-u32max
PARAM_VALUE 0 pdata->i2c.op_state.op->cmd 0-1
PARAM_VALUE 0 pdata->i2c.op_state.op->len 1-3,5,128,256
PARAM_VALUE 0 pdata->i2c_complete.wait.lock.raw_lock.val.counter 0-s32max
PARAM_VALUE 0 pdata->i2c_mutex->first_waiter->task->blocked_lock.owner (-4611686018427387904)-4611686018427387903
PARAM_VALUE 0 pdata->phy.duplex 1
PARAM_VALUE 0 pdata->phy.link 0-1
PARAM_VALUE 0 pdata->phy.rx_pause 0-1
PARAM_VALUE 0 pdata->phy.speed (-1),10,100,1000,2500,10000
PARAM_VALUE 0 pdata->phy.tx_pause 0-1
PARAM_VALUE 0 pdata->phy_if.phy_impl.an_outcome 4096-ptr_max
PARAM_VALUE 0 pdata->phy_if.phy_impl.cur_mode 4096-ptr_max
PARAM_VALUE 0 pdata->vdata->xpcs_access 0-2
PARAM_VALUE 0 pdata->xpcs_lock.rlock.dep_map->name 0-255
PARAM_VALUE 0 *pdata->netdev->name 0-255
PARAM_VALUE 1 set_mode 0
DATA_SOURCE 0 pdata $0
FUZZY_MAX 0 pdata->phy.speed 10000
HARD_MAX 0 pdata->phy.link 1
HARD_MAX 0 pdata->phy.speed 10000
HALF_LOCKED2 &pool->lock